Re: [expert] usb problem with PDA palm zire

[Shamot]

I tried it but it doesnt work. /dev/ttyUSB0 and /dev/ttyUSB1 still don't 
exist. Modules for usb are loaded such as a viser module. There are still 
reported errors like this:

devfsd[143]: error copying: "/lib/dev-state/usb/tts/0" to "/dev/usb/tts/0"
error copying: "/lib/dev-state/usb/tts/1" to "/dev/usb/tts/1"

how should I solve the problem ?


Dne po 31. březen 2003 23:11 jste napsal(a):
> Shamot wrote:
> > Hello. I have just problem when to try hotsync because of nonexisting
> > /dev/ttyUSB0 or /dev/ttyUSB1
> >
> > When I do hotsync it seems kernel recognizes my device and try to load
> > modules and creare /dev/ust/tts/0.
> >
> > Something is wrong here coze I get this from kernel:
> >
> > Mar 30 19:26:02 Shamota kernel: usbserial.c: Handspring Visor / Palm 4.0
> > / Clié 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
> > Mar 30 19:26:02 Shamota kernel: usbserial.c: Handspring Visor / Palm 4.0
> > / Clié 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
> > Mar 30 19:26:02 Shamota devfsd[143]: error copying:
> > "/lib/dev-state/usb/tts/0" t o "/dev/usb/tts/0" Mar 30 19:26:02 Shamota
> > devfsd[143]: error copying: "/lib/dev-state/usb/tts/1" t o
> > "/dev/usb/tts/1" Mar 30 19:26:03 Shamota kernel: usb-uhci.c: interrupt,
> > status 2, frame# 244 Mar 30 19:26:03 Shamota kernel: usb.c: USB
> > disconnect on device 00:1d.1-2 addres s 14
> >
> > hotsync is canceled then and no files in dev are created. Any suggestion
> > how to solve this problem ?
> > Thanks Shamot
>
> Assuming you've got devfs running on boot try setting the device to use
> /dev/pilot. that should do the trick. If you're attempting a hotsync
> with Kpilot I'd suggest you also give Jpilot a try. I've found this to
> work wonderfully. I'm using a Handspring Visor and am having no trouble
> what-so-ever hotsyncing my visor with Jpilot.


Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com